Step 1

Hold the blind in the desired location to mark the edges.

Step 2

Tilt the headrail towards you. Mark an X and draw lines to indicate where the internal components are.

Step 3

Using the brackets, mark the screw locations.

• Align each bracket to the inside or outside of the lines drawn in step 2.
• Do not place a bracket on an X.
• Make sure the brackets are lined up.
• Mark the location for all screw holes.

Step 4

Drill holes using a 1/16" drill bit.

Step 5

Screw brackets into place.

Step 6

Attach end caps to the headrail and bottomrail.

Step 7

Mount blind in brackets.

• Hold the blind so that the tilt wand loop is in front of the slats.
• Tilt the headrail away from you.
• Hook its front lip on the bracket's front hinge.
• Push up and back until it snaps in.