Hook fascia on bracket flange and pivot into place until it clicks. This must be performed at both ends of the fascia.

Attach fascia bracket cover by moving adhesive backing from covers and attaching to bracket ends.

Install the fascia clip through the bottom slot on the face of the bracket. Press firmly on the clip until the bracket is seated behind the angle tab.

Place the fascia trough onto the bottom of the spring clip, push upward to compress the spring clip and snap the top of the fascia over the bracket.

Attach fascia bracket cover by moving adhesive backing from covers and attaching to bracket ends.

Install Hold Down Brackets (optional)

Pess or hammer pins into holes in ends of bottom rail. Screw hold-down brackets into position. Lower shade and place pins into holes.

How To Operate

Gently pull straight down or push straight up to position shade at desired height.